צפייה בגרסה מלאה : שרשור בניה בניה/הרכבה של CARF EUROSPORT
נכבדי....
להלן תחילת תעוד בניה / הרכבה של CARF EUROSPORT
בתי סרוו ...
המשך..http://www.efly.co.il/forums/attachment.php?attachmentid=39320&stc=1&d=1298137983
התקנה של אזני ניהוג בהגאי גובה/מאזנות
צירי הגה כיוון...
http://www.efly.co.il/forums/attachment.php?attachmentid=39332&stc=1&d=1298138515
אני מתנצל אבל אני ממש מרגיש צורך לציין את זה שאתה יכול להעלות יותר מ-2 תמונות בכל הודעה וזה מקל(לפחות עליי) לצפות בהודעות.
תודה, שי :)
שי נכבדי ....התמונות מועלות לפי נושא משותף עם הדגשה של תמונות בעלות מסר הרכבה לאלו המתכננים לבנות את המוזכר ...
אני מצר מעומק ליבי על קשיי הצפיה ....עמכם הסליחה.
haim_zar
19-02-2011, 22:33:42
זה שירשור שמעניין אותי מאוד נעקוב בשקט
פטר תפגיז בתמונות וטיפים כמה שיותר
בהצלחה
להלן תמונות של רוב הציוד ההקפי המיועד להתקנה בטיסן ...
http://www.efly.co.il/forums/attachment.php?attachmentid=39435&stc=1&d=1298288116
Jetster
22-02-2011, 00:44:42
Look forward to your Eurosport build. I am currently trying to finish up an old
Fiberclassic Euro. Hope to have it done this spring. Attached are a few photos
http://www.keepandshare.com/userpics/h/o/n/d/atechforu/2011-02/sb/100_2272-66517961.jpg?ts=1298290036
http://www.keepandshare.com/userpics/h/o/n/d/atechforu/2011-02/sb/100_0120-38038367.jpg?ts=1298290033
http://www.keepandshare.com/userpics/h/o/n/d/atechforu/2011-02/sb/100_0016-69407936.jpg?ts=1298290032
http://www.keepandshare.com/userpics/h/o/n/d/atechforu/2011-02/sb/100_1461-32228614.jpg?ts=1298290034
http://www.keepandshare.com/userpics/h/o/n/d/atechforu/2011-02/sb/100_1497-6401482.jpg?ts=1298290035
Jetster
22-02-2011, 00:54:49
http://www.keepandshare.com/userpics/h/o/n/d/atechforu/2011-02/sb/100_2378-85058975.jpg?ts=1298290036
http://www.keepandshare.com/userpics/h/o/n/d/atechforu/2011-02/sb/100_2503-49743181.jpg?ts=1298290037
http://www.keepandshare.com/userpics/h/o/n/d/atechforu/2011-02/sb/100_2504-82795231.jpg?ts=1298290038
http://www.keepandshare.com/userpics/h/o/n/d/atechforu/2011-02/sb/100_2507-35546289.jpg?ts=1298290038
http://www.keepandshare.com/userpics/h/o/n/d/atechforu/2011-02/sb/100_2618-59661481.jpg?ts=1298290039
Jetster
22-02-2011, 00:58:00
http://www.keepandshare.com/userpics/h/o/n/d/atechforu/2011-02/sb/100_2753-18435966.jpg?ts=1298290039
http://www.keepandshare.com/userpics/h/o/n/d/atechforu/2011-02/sb/100_3043-38565676.jpg?ts=1298290041
http://www.keepandshare.com/userpics/h/o/n/d/atechforu/2011-02/sb/100_2779-22497298.jpg?ts=1298290042
Jetster
22-02-2011, 01:05:38
Had a go at trying to bring a little flair to the cockpit area
http://www.keepandshare.com/userpics/h/o/n/d/atechforu/2010-01/sb/000_0216-10189384.jpg?ts=1265084369
http://www.keepandshare.com/userpics/h/o/n/d/atechforu/2010-01/sb/000_0218-11572606.jpg?ts=1265084369
http://www.keepandshare.com/userpics/h/o/n/d/atechforu/2010-01/sb/000_0226-46804666.jpg?ts=1265084369
http://www.keepandshare.com/userpics/h/o/n/d/atechforu/2010-01/sb/100_0095-49487349.jpg?ts=1265084369
סאונד בראש
22-02-2011, 05:48:12
מדהים
:eek:
ZvikaF
22-02-2011, 12:39:41
Nice detailed work
Keep us posted
haimz24
22-02-2011, 14:13:05
נראה סופני, כל הכבוד...
המשך עבודה....בתי מיכל דלק..
מייצב כיוון ...סרוו ניהוג גלגל קדמי
Jetster
23-02-2011, 12:49:55
I don't read Hebrew, but Google translator works great.
Thanks guys for the comments
Now you have the oportunity to install twin 3D vector nozlles and enjoy full 3D capability including roll .....:cool:
ZvikaF
23-02-2011, 21:02:10
MCMF. I think we found another knowledged Jet builder
Liked the detail inside the exhaust pipe :) , AfterBurner ?
z
Jetster
24-02-2011, 00:40:44
אני אנסה לכתוב על החבר 'ה שלך שפת באמצעות מתרגם.
אין סיכוי דחף vectored זה ללכת מסביב. אולי בפעם הבאה. לא afterburners או,
טאם צינור מפוצלת ו חרירי אס
I believe that Google didn't translate you correctly, please rewrite in english :)
Jetster
24-02-2011, 13:03:23
I agree, it came out a bit jumbled. I basically said that this Eurosport
will not have thrust vectoring or afterburners either.
It has a Tam bifurcated pipe and SS nozzles
As I am using full intake liners, the upper intake splitter has to be made
removable. A few photos of the intake and nose gear install
http://www.keepandshare.com/userpics/h/o/n/d/atechforu/2011-02/sm/100_2253-68537650.jpg?ts=1298506511
http://www.keepandshare.com/userpics/h/o/n/d/atechforu/2011-02/sm/100_2256-33779352.jpg?ts=1298506511
http://www.keepandshare.com/userpics/h/o/n/d/atechforu/2011-02/sm/100_2257-7786341.jpg?ts=1298506512
Jetster
24-02-2011, 13:09:00
http://www.keepandshare.com/userpics/h/o/n/d/atechforu/2011-02/sm/100_2574-68141097.jpg?ts=1298506513
http://www.keepandshare.com/userpics/h/o/n/d/atechforu/2011-02/sm/100_2575-44808104.jpg?ts=1298506514
http://www.keepandshare.com/userpics/h/o/n/d/atechforu/2011-02/sm/100_2578-31826294.jpg?ts=1298506515
http://www.keepandshare.com/userpics/h/o/n/d/atechforu/2011-02/sm/100_2578-31826294.jpg?ts=1298506515
http://www.keepandshare.com/userpics/h/o/n/d/atechforu/2011-02/sm/100_2640-21848916.jpg?ts=1298506516
Jetster
24-02-2011, 13:11:26
http://www.keepandshare.com/userpics/h/o/n/d/atechforu/2011-02/sm/100_2641-78162486.jpg?ts=1298506516
http://www.keepandshare.com/userpics/h/o/n/d/atechforu/2011-02/sm/100_2644-16682911.jpg?ts=1298506517
http://www.keepandshare.com/userpics/h/o/n/d/atechforu/2011-02/sm/100_2648-48374409.jpg?ts=1298506518
Awesome looking jet!
Did you consider opening a building thread?
Yep....those exhaust nozzles are made by a fellow modeler named Tam in California
I recommend reinforcing the nose landing gear mounting plate to fuselage glue join with strips of fiber glass tape and laminating resin.
ZvikaF
24-02-2011, 16:58:35
is the front wheel steerable ?
very nice work
the afterburner mentioned was meant for a decoy
Actually some people install a simulated afterburner ring made out off many LED's that their glow intensity is linear with the engine's throttle setting
Jetster
25-02-2011, 01:01:27
I recommend reinforcing the nose landing gear mounting plate to fuselage glue join with strips of fiber glass tape and laminating resin.
Good call. I had actually planned to do that, just have not got around to it yet.
The Euro has been in it's current state of build for awhile now, just need
to finish it up. As this is one of the original versions, the main gear plates
will need to be reinforced. I have replaced the original fiberglass wing rods
with c/f rods and also the canard rods have been upgraded to c/f rods
Jetster
25-02-2011, 01:07:59
is the front wheel steerable ?
very nice work
the afterburner mentioned was meant for a decoy
The nose gear will be steerable, but I still need to build and install
the servo tray as MCMF has shown in his photos. Just one more item on the
do list
MDreamer
25-02-2011, 18:32:41
WOW!:D that's some high quality stuff!
keep in coming and welcome to eFly!
Jetster
26-02-2011, 14:14:20
WOW!:D that's some high quality stuff!
keep in coming and welcome to eFly!
Thanks for the welcome. Glad I was able to contribute to the forum. Hope I did not offend MCMF by posting in his build thread.
The fiberglass rods where ment to work as sort of shock absorbers while CF rods are totally flexible like sort of a spring and hence are driving the energy right into the structure
I would only recommend to replace the canard rods.
מיקום סרוו הגה כיוון , סרוו מאזנות / הגה גובה
מיקום והדבקה של בתי מיכל דלק בגוף...
איזון סטטי לקנרדים עם הכנסה של כ-25 גרם עופרת לאזור בסיס שורש המייצב ....http://www.efly.co.il/forums/attachment.php?attachmentid=41433&stc=1&d=1301385986
בית קונקטור סרוו בין גוף למייצב כיוון.
שדרוג מגש נושא ציוד משולב עם כנפונים.
הכנה של בתי סרוו לניהוג הווקטורי ומיקומם בגוף.
zivbit
31-03-2011, 17:54:41
נראה טוב פטר
אני עובד עכשיו על הגוף
שים עוד כמה תמונות של הגה כיוון, בעיקר בתוכו - תצורה של מוטות ההיגוי (כיפופים
תודה
זיו
ייצור מיתכון , ומיקום מיכלי אויר...
תחילת חיווט והעברת צנרת אויר....
http://www.efly.co.il/forums/attachment.php?attachmentid=42101&stc=1&d=1302643857
מיתכון סוללות...
http://www.efly.co.il/forums/attachment.php?attachmentid=42197&stc=1&d=1302891126
ZvikaF
16-04-2011, 18:34:47
מושקע מאוד,יופי של עבודה :)
eli-f
20-04-2011, 21:00:17
וואו איזה טיסן
מתי הטסט?
45020450214502245023עוד אופציות מיתכון....
vBulletin® v4.2.5, זכויות יוצרים ©2000-2024, Jelsoft Enterprises Ltd, תורגם על ידי vBHeb.