שרשור בניה של F/A-18 1/7 של חברת YELLOW AIRCRAFT

hardly seen are panel lines engraved in the surface....

seen here are the secondary flap with some small torsion spring made of 0.8mm piano wire glued to the surface with DP460 Epoxy.

Preparation of servo hatches...

Filling the fuselage separation mold line with car putty...

fuselage seam line filled ,sanded flush and coated with primer....

more work on the wings....flaps at fully deployed position, "takeoff" and flight...

Final fit work on gear doors done......:D

Next are some shots of the scale simulated wing folding hump on the top of the wing.....

Fins under work,filling gaps,:mad applying primer..... sanding :mad:

Applying engraved panel lines

...http://www.efly.co.il/forums/attachm...1&d=1278575999

...http://www.efly.co.il/forums/attachm...1&d=1278576110

http://www.efly.co.il/forums/attachm...1&d=1278576239

http://www.efly.co.il/forums/attachm...1&d=1278576350

Stabilizers finish under go...

...http://www.efly.co.il/forums/attachm...1&d=1278576723

Next I deal with the splitter plates, first step is laminating 1/8 balsa plank on the inner surface of the part and sanding down to a minimum the LE's
after that covering the surface with 120g cloth and resin ....

יש לו"ז לסיום ?

מה עם פינאלה?
זה הפרוייקט הכי מושקע שיש סחתיין!!

2~3 חודשים לסיום.....מעייף.:)

After glassing ,sanding filling and co for so long I've decided to do something diffrent today.....

Preparation of possition lights red port side first...

...

more....

more...

more