נערך לאחרונה על ידי rotemshan; 07-03-2014 בשעה 13:00:27.
=============================
FUTABA 9CAP
Bixler 1, Apprentice, Super frontier - OS, Xeno - Flying wing, Canary - Glider, Yak55 - 3D, Yak54 carbon z - 3D, Butterfly - Kappa, Mini F22 - 50mm EFD, Corsair - parkzone, Habu EDF - Parkzone, Mugi, Walkera QR X 400, BlackHorse Models - Blade, ZMR250 FPV
Great success
Sent from my SM-N900 using Tapatalk 2
=============================
FUTABA 9CAP
Bixler 1, Apprentice, Super frontier - OS, Xeno - Flying wing, Canary - Glider, Yak55 - 3D, Yak54 carbon z - 3D, Butterfly - Kappa, Mini F22 - 50mm EFD, Corsair - parkzone, Habu EDF - Parkzone, Mugi, Walkera QR X 400, BlackHorse Models - Blade, ZMR250 FPV
שרשור בניה חיבור מערכת FrSky עם RS232 ומודול Bluetooth למארטפון - eFly
http://www.efly.co.il/forums/showthr...F8%E8%F4%E5%EF
Sent from my LG-D802 using Tapatalk
"If everything seems under control, you're not going fast enough" Mario Andretti
עכשיו, אחרי שהצלחתי להתאים את הטלמטריה ולהגדיר התראות כאשר מתח הסוללה יורד מתחת ל 11.1v ,
אני בבעיה אחרת ...
כל זה טוב עבור סוללת 3 תאים - התראה עבור סוללת 4 תאים צריכה להיות במתח גבוה יותר.
האם אפשר לקבוע התראה שתהיה עבור מתח לפי תא?
כלומר שמתח באחד התאים יורד מתחת ל 3.7v ההתראה תתחיל לעבוד
אני חושב שהמינימום זה 2S. תמדוד 2 למרות שאני חושב שזה bad practice. תשנה את סף ההתראה דרך התוכנה בפלאפון לכל טיסן לפני שאתה עולה לאוויר - כמו שאתה מחליף מודל בשלט
"If everything seems under control, you're not going fast enough" Mario Andretti
עוד לא חיברתי את המודול לטלפון, אני מחכה לחלקים.
אני יודע שיש איזה רכיב טלמטריה שיודע למדוד מתח לפי תא,
http://www.hobbyking.com/hobbyking/s...r_flvs_01.html
האם על פי זה אפשר ליצור התראה לפי תא?
Sent from my SM-N900
=============================
FUTABA 9CAP
Bixler 1, Apprentice, Super frontier - OS, Xeno - Flying wing, Canary - Glider, Yak55 - 3D, Yak54 carbon z - 3D, Butterfly - Kappa, Mini F22 - 50mm EFD, Corsair - parkzone, Habu EDF - Parkzone, Mugi, Walkera QR X 400, BlackHorse Models - Blade, ZMR250 FPV
אני לא זוכר בע"פ - הנתונים בוודאות יורדים למטה. אם אפשר לקנפג התראה אני לא זוכר. צריך לבדוק בספרות שלהם
"If everything seems under control, you're not going fast enough" Mario Andretti
לדעתי אפילו הם לא מבינים מה כתוב בספרות שלהם
ZvikaF (07-05-2014)
זה גם נקרא open source :-)
Sent from my LG-D802 using Tapatalk
"If everything seems under control, you're not going fast enough" Mario Andretti
זה מה Wiki ...
אי אפשר ללמוד הרבה מזה
FLVS-01 Lipo Voltage Sensor
Dimensions 45x21x7mm
Weight 5.2g
Measurement range 1S~6S
Cell Voltage Display Range 0.20-4.20V
Voltage Display Resolution 0.01V
Voltage Detection Precision 0.03V
Operating Current 15.5mA
Display 128x64 OLED display
The FLVS-01 is a more advanced voltage sensor than the FBVS-01. It is a digital sensor reporting individual cell voltages for 1s through 6s batteries. It can operate connected to a sensor hub FSH-01 or alternatively can be connected to one of the FAS-40/100 current sensors which in turn connect directly to the receiver. In either case it can only be used with receivers that have a digital data port (all "D"-series receivers except the DF6R). It reads cell voltage via the battery balance plug.
Two of the sensors can be combined for battery packs of up to a 12s configuration. Beware that with the current V2.01 firmware the FLD-02 telemetry display can only display 6 voltages.
A nice feature is the integrated OLED display that enables the FLVS-01 to be used as a standalone lipo checker.
לאחר כמה מיילים עם שירות הלקוחות של FrSky
מסתבר שאין אפשרות ליצור התראה לפי מתח ת"א בודד
Hi Rotem,
Thanks for your email, yes, the sensor only can count the cells number and measure each cell voltage, but it can not create alarm, only use our Taranis with the sensor..
Sent from my SM-N900
=============================
FUTABA 9CAP
Bixler 1, Apprentice, Super frontier - OS, Xeno - Flying wing, Canary - Glider, Yak55 - 3D, Yak54 carbon z - 3D, Butterfly - Kappa, Mini F22 - 50mm EFD, Corsair - parkzone, Habu EDF - Parkzone, Mugi, Walkera QR X 400, BlackHorse Models - Blade, ZMR250 FPV
אתה יכול לבנות מחלק מתח
Sent from my LG-D802 using Tapatalk
"If everything seems under control, you're not going fast enough" Mario Andretti
כן. ה AN1 ו AN2 של המקלט שם מחוברות לרגל של המעבד שקוראת מתח אנלוגי אם תבנה מחלק מתח שמוריד את ה 4.2-3v של סוללה במצב טעון ל 3.2v במצב טעון (סתם כדי להיות רגוע ולא להתקרב ל 3.3 ולשרוף את המעבד) תוכל לקבל אינדיקציית מתח ע"י כיוון ה ratio הנכון בהגדרת התוכנה של המודול.
נגד של 100 אוהב ו 320 אוהם יעשו את העבודה.
"If everything seems under control, you're not going fast enough" Mario Andretti
אם אני מבין נכון זה לא פותר את הבעיה שלי.
אם אני עובד עם סוללות עם מספר תאים שונה, מחלק המתח יחזיר לי מתח שונה
כלומר בעבודה עם שני תאים אני אקבל 7.4v
בעבודה עם 3 תאים אקבל 11.1v
בעבודה עם 4 תאים אקבל 14.8v