ליפו חלשה מסוכנת לבקרים
מתוך הבלוג של HK
Some of our customers may be unaware of the damage caused to an ESC by a poorly functioning LiPo. If your LiPo is worn out, of poor quality or damaged, do not connect it to an ESC/Motor combination that will push the battery to it's limit. ESC's require a power source that can constantly supply the power needed to open/close the mosFET's in the ESC. A poorly performing battery will cause the FET's to stay open causing the ESC to burn or overheat. Yes, a low voltage or low C battery can damage your ESC!
Success is the ability to go from one failure to the next without any loss of enthusiasm