בניה/הרכבה של CARF EUROSPORT

**Jetster** · 24-02-2011, 00:40:44

אני אנסה לכתוב על החבר 'ה שלך שפת באמצעות מתרגם.

אין סיכוי דחף vectored זה ללכת מסביב. אולי בפעם הבאה. לא afterburners או,
טאם צינור מפוצלת ו חרירי אס

**Shay** · 24-02-2011, 12:14:46

I believe that Google didn't translate you correctly, please rewrite in english

**Jetster** · 24-02-2011, 13:03:23

I agree, it came out a bit jumbled. I basically said that this Eurosport
will not have thrust vectoring or afterburners either.
It has a Tam bifurcated pipe and SS nozzles

As I am using full intake liners, the upper intake splitter has to be made
removable. A few photos of the intake and nose gear install

**Jetster** · 24-02-2011, 13:09:00

**Jetster** · 24-02-2011, 13:11:26

**Shay** · 24-02-2011, 13:33:34

Awesome looking jet!
Did you consider opening a building thread?

**MCMF** · 24-02-2011, 13:56:35

Yep....those exhaust nozzles are made by a fellow modeler named Tam in California

**MCMF** · 24-02-2011, 14:01:17

I recommend reinforcing the nose landing gear mounting plate to fuselage glue join with strips of fiber glass tape and laminating resin.

**ZvikaF** · 24-02-2011, 16:58:35

is the front wheel steerable ?

very nice work
the afterburner mentioned was meant for a decoy

**MCMF** · 24-02-2011, 22:33:59

Actually some people install a simulated afterburner ring made out off many LED's that their glow intensity is linear with the engine's throttle setting

**Jetster** · 25-02-2011, 01:01:27

נכתב במקור על ידי MCMF

I recommend reinforcing the nose landing gear mounting plate to fuselage glue join with strips of fiber glass tape and laminating resin.

Good call. I had actually planned to do that, just have not got around to it yet.
The Euro has been in it's current state of build for awhile now, just need
to finish it up. As this is one of the original versions, the main gear plates
will need to be reinforced. I have replaced the original fiberglass wing rods
with c/f rods and also the canard rods have been upgraded to c/f rods

**Jetster** · 25-02-2011, 01:07:59

נכתב במקור על ידי ZvikaF

is the front wheel steerable ?

very nice work
the afterburner mentioned was meant for a decoy

The nose gear will be steerable, but I still need to build and install
the servo tray as MCMF has shown in his photos. Just one more item on the
do list

**MDreamer** · 25-02-2011, 18:32:41

WOW!

that's some high quality stuff!
keep in coming and welcome to eFly!

**Jetster** · 26-02-2011, 14:14:20

נכתב במקור על ידי MDreamer

WOW!

that's some high quality stuff!
keep in coming and welcome to eFly!

Thanks for the welcome. Glad I was able to contribute to the forum. Hope I did not offend MCMF by posting in his build thread.

**MCMF** · 26-02-2011, 19:55:24

Not at all....

**MCMF** · 26-02-2011, 20:00:26

The fiberglass rods where ment to work as sort of shock absorbers while CF rods are totally flexible like sort of a spring and hence are driving the energy right into the structure

I would only recommend to replace the canard rods.